! Silent Switch Requests Here Please !

ms office 2007
ms office 2010
ms office 2013

switch pl

hey i posted here:

https://winreducer.forumotion.com/t290-silent-switches-for-software-installations

a switch for office 2010 (and how to make a answer file)

for 2007 should be the same 

i think it should be for 2013 the same but not tested

Doesn't anyone knows how to automate Corel draw x6? I use the Trial, mostly to make/clean/cut wallpapers in Photo-Paint,  because it costs over the minimum monthly wage over here, but is a hassle having to manually install it every time.
(windows too, but that one came with the PC)
Also I don't think its possible (or so says the maker) but VirtualMIDISynth is also appreciated.

hi please make me a code for this

system ninja cleaner
adobe air
silverlight
teracopy

found a code for silverlight. but havent tried yet.

/q /doNotRequireDRMPrompt /ignorewarnings

Silent installation for "StartIsBack"

Do they have any?

steam and battle.net silent install switches.

any chance for Windows 8 Manager?
Thanks in advance

NVIDIA Graphic Drivers:

Is it possible to make a silent custom install with this options ?

Custom (Advanced)

YES "Graphics Driver"
NO  "3D Vision Controller Driver"
NO  "3D Vision Driver"
NO  "HD Audio Driver"
NO  "NVIDIA Update"
NO  "PhysX System Software"

YES "Perform a clean installation"

Classic Shell silent switch please

ngsbuiltfortomorrow wrote:

Classic Shell silent switch please

normally it should be

/qn

http://www.classicshell.net/faq/#install_commands

Could you please let me know if these steps are correct
1. mount
2. system
3. WinReducer Post Installation
4. OOBE
5. on
6. Add a file
7. "%CDROM%\WinReducerPI\ClassicShellSetup_4_1_0.exe"
8. "%CDROM%\WinReducerPI\ClassicShellSetup_4_1_0.exe"/qn   ?
9. Finish

i never used the OOBE part but i would say it Looks OK

I want to run two silent EXE files on first logon after Windows completes. any one can guide me how to made SetupComplete.cmd for this?

maybe this helps:

http://www.tech-recipes.com/rx/21558/how-to-run-commands-after-windows-7-deployment-using-setupcomplete-cmd/

http://blog.unidesk.com/tech/using-setupcompletecmd-windows-7-post-build-unattended-configurations-and-actions

how the .cmd should look and where to put it:

http://www.wincert.net/forum/topic/10993-question-wintoolkitrunonceexe-and-setupcompletecmd/?p=95793

Thanks KrX, I'll report here after testing.

Request for:

SQL Anywhere - /S is not working
VLC Player - /S is not working
WinmailOpener - /S is not working

Thanks in Advance n Regards

user221 wrote:

Request for:

SQL Anywhere - /S is not working
VLC Player - /S is not working
WinmailOpener - /S is not working

Thanks in Advance n Regards

normally the /S switch should work for vlc player, i tested it with version 2.2.1 and it worked. if not you could get a .msi from here:

http://www.videolan.org

extract the zip (you get an .exe and .msi) and use on the msi the switch "/qb" (without ") it worked for me too

---------------------

"winmail-reader-setup.exe" /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /SP-

"winmail_opener.exe" /S

i tested both. winmail opener version 1.6 worked with /S

--------------------------------

SAP SQL Anywhere 16.0

http://dcx.sybase.com/index.html#sa160/en/dbprogramming/using-silent-install-deploy.html

if you download like me "SQLA16_Windows_Client.exe" you need to extract it first (i did it with 7zip) so you get some files like setup.exe + 32 and 64 bit msi

you could install the .msi with /qb or just follow the link above where you get the parameters for the setup.exe

Please driver NVIDIA QUADRO and inf INTEL silent installazion

Tanks.

PremierePRO wrote:

Please driver NVIDIA QUADRO and inf INTEL silent installazion

Tanks.

for the normal Nvidia package it should be :

setup.exe /n /s /noeula /nofinish

/s - silent install
/n - no reboot

what intel do you mean?

i would recommend this tool:

https://winreducer.forumotion.com/t288-silent-install-silent-switches#2404

just select your i.e. *.exe file and it will tell you the switches for most installers out there

Thank you.

Searching for

HP DRIVER DEPLOYEMENT UTILLITY

none is working eg. /s /q /qn

just confusing

For classic shell; /passive

greenworld wrote:

For classic shell; /passive

actually there are some more options:

What are the command line parameters for the installer?
The ClassicShellSetup.exe installer supports many command line parameters:
    <no command line> - runs the installer normally
    extract32 - extracts the 32-bit MSI
    extract64 - extracts the 64-bit MSI
    help - shows the command line help
    <some msiexec options> - the options are passed to msiexec
       * if the options contain %MSI% (all caps) the token is replaced by the name of the extracted MSI file
       * if %MSI% is not found, the setup runs "msiexec /i <MSI file> <some msiexec options>"

Examples:
    /qn - runs the installer in quiet mode
    /x %MSI% /qb - uninstalls the product in basic UI level
    /f %MSI% - repairs the product
    /l* log.txt - runs the installer and logs the process in the log.txt file
    APPLICATIONFOLDER="C:\Programs\Classic Shell" - sets the installation folder
    /qn ADDLOCAL=ClassicExplorer - installs only Classic Explorer in quiet mode
    /qn ADDLOCAL=ClassicStartMenu - installs only Classic Start Menu in quiet mode
    ADDLOCAL=ClassicStartMenu,ClassicIE - installs the Classic Start Menu and Classic IE. Note: there must be no space before ClassicIE
    /qb START_MENU_FOLDER=0 - runs in basic mode and skips the creation of a start menu folder
    NOSTART=1 - suppresses the automatic launch of the start menu after install

and to restore your settings, create an reg file and execute it afterinstalling:

All Classic Shell settings are stored in the registry at HKEY_CURRENT_USER\Software\IvoSoft. So you can back up that key and silently merge it.

Note that changing the registry settings directly while the Start Menu is running isn't supported. So you can right click the Start button -> Exit. Merge a set of exported .REG settings and start the menu again from C:\Program Files\Classic Shell\ClassicStartMenu.exe.
For all users, the Settings subkey is not required. The key is HKLM\SOFTWARE\IvoSoft\ClassicStartMenu

You can also automate this using a batch file:

"C:\Program Files\Classic Shell\ClassicStartMenu.exe" -exit
Regedit /s "<Path to REG file.reg>"
"C:\Program Files\Classic Shell\ClassicStartMenu.exe"

Thanks KrX, you given good info.
I have a setting file, which I load after installation. What there is way to install classic shell silently and apply this setting without any prompt, also I only need start menu from it, classic ie and explorer not needed.

I put my ''scripts'' folder in install.wim/windows/setup,
other two programs in this folder woking properly, but ''WinRAR'' ask me about extraction location, while I made it fully silent.
On installed Windows it works properly,
anyone can tell the method how to install WinRAR silently with Windows installation??
Thanks

hi,

im not sure if i understood right.

do you want to install winrar silent or do you want to install some software with winrar (silent sfx archive) ?

if you want to install winrar, the switch should be "winrar-x64-500.exe /s"

if you want to use winrar to create an sfx archive to install some other software silently:

http://www.isunshare.com/blog/how-to-create-sfx-archive-with-winrar-and-7zip/

http://www.jackmccarthy.com/malware/WinRAR_Archive_Creation.htm

to use a parameter you need to enter at "Run after" the exact name of i.e. your .exe file with your parameter i.e. "winrar.exe /s"

Sorry for not clear question.
I used WinRAR to make the silent installer of WinRAR, and used same switch as you said.
The bad part is that x64 is working, but if I try x86, it says about location where it will extract it.

so each time this windows opens?

http://www.jackmccarthy.com/malware/WinRAR_Archive_Creation_files/image024.jpg

if yes did you you check this options (also check the "unpack tp temp folder")

http://www.jackmccarthy.com/malware/WinRAR_Archive_Creation_files/image010.jpg


if it is still not working you could try 7zip sfx maker

http://sourceforge.net/projects/sfx-maker/